Cleaning & Maintenance - Waring WWB3G Series Manual

Helpful Hints
Why use Night Mode?
When you need hot water at the start of business, but do not want
your machine on full power during non-business hours. Utilize
Night Mode, an energy-saving feature that will maintain a water
temperature of 158°F/70°C during non-business, and heat to full set
temperature at the time you set.
What time should I set Night Mode to?
Once Night Mode turns off and the machine is re-energized, it will
take approximately 1 hour to reach 205° (MAX), so set the time for
Night Mode for approximately 1 hour before you will need hot water.
Can I change the temperature in Night Mode?
158°F/70°C is the fixed temperature and cannot be adjusted.
CLEANING & MAINTENANCE
ALWAYS DISCONNECT OR UNPLUG THE HOT WATER DISPENSER
BEFORE CLEANING. Allow the hot water dispenser to cool
completely before handling or before cleaning.
1. Dispense of any remaining water from the spigot.
2. Wipe exterior and control panel with a nonabrasive, damp cloth
and dry.
• DO NOT use any cleaning fluids that can be harmful to you,
others around you, or to the environment.
• DO NOT hose down, immerse or pressure wash any part of
the hot water dispenser.
• NEVER use steel wool or abrasive materials to clean the hot
water dispenser.
• NEVER remove spigot when the hot water dispenser has
water in it. Switch OFF the power to the unit at the circuit
breaker. Turn OFF the water line running to the hot water
dispenser.
NOTE: All sanitizing agents in the food zone must comply with U.S.
Food & Drug Administration Code of Federal Regulations Title 21,
Section 178.1010. Sanitize all food-dispensing units periodically. All
parts to be sanitized must be cleaned first. Cleaning and sanitizing
frequency must follow state and local health department regulations.
NOTE: Do not use cleansers, bleach liquids, powders, or any other
substance containing chlorine. These products promote corrosion
11