Interactive Health iJoy humanTOUCH ROBOTIC MASSAGE HT-103 Use & Care Manual page 4

GET
READY
Unpack the box
Chair
1. Unfold the chair
Remove all packaging materials from the chair.
Pull up on the backrest to unfold the chair to an
upright position. The backrest locks into place
automatically.
www.interhealth.com
6
Seat Pad Backrest Pad Head Pillow
2. Install the backrest pad
Attach the backrest pad to the backrest using the hook and loop
fasteners on the top of the backrest and backrest pad. Smooth
the two flaps on the bottom of the backrest pad under the bottom
of the backrest. The flaps attach to the backrest using the hook
and loop fasteners. Attach the flaps on each side of the backrest
pad to the backrest, using the hook and loop fasteners.
3. Install the seat cushion
Stand at the right-hand side of the chair. Pull up on the footrest lever to
extend the footrest to a horizontal position. Pull up on the footrest release
handle, located on the right-hand side of the footrest, then rotate the
footrest away from the chair until it is in a vertical position. Attach the seat
cushion to the back of the seat, using the hook and loop fasteners. Wrap
the flap on the front of the seat cushion around the chair frame and attach
it to the top of the chair frame using the hook and loop fasteners.
4. Install the head pillow
Attach the head pillow to the flap on the top of the
backrest pad using the hook and loop fasteners.
Adjust the head pillow height for maximum comfort.
Your HT ™ -103
requires some simple assembly
(no tools required). Just install
the backrest pad, the seat pad
and the head pillow, and you're
set to go!
7