Table of Contents
Advertisement
Menu functions
IP address: enter the IP address of the proxy
•
server.
•
Port: enter the port number of the proxy
server.
•
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
•
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
•
DNS1 and DNS2: enter the primary and
secondary DNS addresses.
•
Bearer: select the network bearer type.
•
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
96
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
4. Press <Save> to save the profile.
Creating a streaming server profile
Setting up a streaming server profile may not be
available depending on your service provider.
1. Press <New>. If a profile has already been saved,
press <Options> and select Add new
connection.
2. Select Streaming settings.
3. Specify profile parameters:
•
Profile name: enter a profile name.
•
APN: enter the access point name.
•
Login ID: enter the login ID.
Password: enter the login password.
•
4. Press <Save> to save the profile.
Advertisement
Table of Contents
