Advertisement
LED Outdoor Sconce Luminaires
Surface Mount
120-277VAC / 60Hz
4. Fixture back pan mounting.
A.
For
BDWW041423LAJD2xx,
back pan (5) to mounting bracket (2) by
aligning to two studs (3) then secure with two
thumb nuts (6).
B.
For BDWW072033LAJD2xx &
BDWW083035LAJD2xx, install fixture back
pan (5) to mounting bracket (2) by aligning to
two studs (3) then secure with two thumb nuts
(6) and secure with additional wood screws
(10) to previously drilled holes or plastic
anchors (11).
5. Diffuser installation.
A.
For BDWW041423LAJD2xx &
BDWW072033LAJD2xx, install diffuser (7) to
the back pan (5) by aligning top and bottom
holes then secure with two #8-32 screws (8).
B.
For BDWW083035LAJD2xx, install diffuser
(7) to the back pan (5) by aligning side holes
then secure with four #8-32 screws (8).
6. For Wet Location Use:
A.
Apply a small amount of silicone (not
included) per manufacturer's instruction
around screws (8) and around the diffuser (7)
where it contacts with the surface of the wall
on top and two sides, but not on bottom.
7. Restore power at fuse or circuit
breaker box.
Limited Factory Warranty
AFX Inc. hereby warranty that this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions
for a period of 5 years from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective fixture
or components; it does not cover failure due to improper installation, misuse, mishandling, or damage incurred in transit.
Page 2 of 2
install fixture
Models # BDWW041423LAJD2xx
BDWW072033LAJD2xx
BDWW083035LAJD2xx
8061067 R2
Advertisement
