Connecting to External Devices
Turn on power by pressing the power button on the monitor.
A
Power button
Turn on the PC.
B
Select an input signal.
Press the Input Select button on the remote controller to select the input signal.
Or, press the SOURCE button at the front side of the monitor.
When connecting with a DVI-D signal input cable.
A
• Select DVI DIGITAL: DVI-D digital signal.
When connecting with a
DVI-A
signal input cable.
B
• Select
DVI
ANALOG:
DVI-A
analog signal
DVI
Note
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
A12