Lanberg DSP2 Series Manual page 6

Quick Installation Guide
Desktop type 12 V switches
1) Important pre-recommendations and information regarding desktop type 12 V switch
usage
1.1) Introduction
PLEASE KEEP THIS MANUAL – set of recommendations and user manuals for Lanberg desktop type 12 V
switches, detailing the models supported below:
•
DSP2-1005-12V
•
DSP2-1008-12V
contains logistics and technical data, instructions and regulations that must be adapted and followed
during transport, assembly, use and maintenance of above mentioned products. Do not use the device
before carefully reading and adhering to all the information and safety precautions contained in the user's
manual. Keep this manual for later use. All photos, drawings contained in the manual are for reference
only.
NOTE: For the most up-to-date version of this manual, please visit our website at www.lanberg.eu.
1.2) Contents of the package
•
Desktop type 12 V switch (DSP2-1005-12V, DPS2-1008-12V),
•
Quick installation guide,
•
Power supply: DSP2-1005-12V, DSP2-1008-12V models: AC 100 V – 240 V, 50 Hz / 60 Hz, 0.3 A, DC 12
V, 0.5A,
NOTE: The contents of the packaging, its individual elements and desktop type 12 V switches may vary
depending on the particular model.
2) The importance of individual elements
2.1) LEDs and their meaning
Lanberg's desktop type 12 V switch, has, on the front panel, multiple green LEDs. Their number and
meaning may vary depending on your model. Below displayed table contains explanation of each LED
regardless of the desktop switch model.
LED
1 – 5 or 1 – 8
E-mail: support@lanberg.eu
www.lanberg.eu
Meaning
Device is turned
Power
Port
(LAN / Ethernet)
Lanberg © 2015-2019
Solid LED Blinking LED
on
Device is transmission /
connected reception is in
LED is turned off
Device is turned
-
Data
Local device is
not connected
progress
off
PL | EN
6 | 8