Step 1:
Connect your IR-BT100 to your dock's 30 pin connector.
The LED indicator will illuminate RED when completed successfully.
Step 2:
Turn the Bluetooth feature on, on your portable device.
Step 3:
Start scanning / searching for IR-BT100.
Step 4:
Once found and selected, you will be prompted for a password to being "pairing".
The password is 0000 (4 zeros).
Step 5:
Once connected and paired, the LED indicator will illuminate BLUE.
Step 6:
You are now ready to listen to music wireless via your portable device.
Open your music files, select a song and press play.
FAQ
I can-not see the LED indicators so I am not
sure I am paring the device correctly.
Will the IR-BT100 suit my portable bluetooth
device?
Will the IR-BT100 suit my dock?
Does the IR-BT100 works will all docks on the
market?
Can I pair two devices at once?
QUICK START GUIDE
Power off your dock (and portable device if
required) and retry the installation process.
The IR-BT100 works with all generic A2DP or
AVRCP compatible devices.
The IR-BT100 suits all popular models of 30pin
"Apple" docks. Please ensure your dock has a
30 pin connector.
This docks works with all popular models of
30pin docks. Due to some manufacturer
specific designs now or in the future however,
changes may occur which are outside our
control. Some may have non-standard 30 pin
connector wiring for example.
No. Before you attempt to pair a second
device, the first device must be powered off or
have the bluetooth feature turned off.
IR-BT100
1 |
P a g e