Table of Contents
Advertisement
Wall Mounting Mode
The FWT can be placed vertically on the wall.
Installation preparation
1. Confirm the handset retaining clip state
Before installation, confirm whether the handset retaining clip is as the same
as shown in Figure 3-1, that is, the bulge is upwards. If it is not, pull the
button, as shown in Figure 4-4, out of the slot, turn it around and then put it
back so that the handset will not fall down when the FWT is placed vertically.
Figure 4-4 Handset retaining clip installation
2. Install the wall-mounting bracket
Install the wall-mounting bracket to the corresponding area, as shown in
Figure 4-5.
Figure 4-5 Wall-mounting bracket installation
Installation procedure
As shown in Figure 4-6, hammer two nails into the wall based on the distance
between the two hooks (about 62.5mm), leave 3mm nails from the wall and then
match the installation holes on the back of the FWT with the nails, making sure
the FWT is placed steadily.
4 Installation Description
HUAWEI
23
Advertisement
Table of Contents
