Changing The Illumination Lamp - Beko CNG4601DVPS User Instructions

4. Refer to cleaning and care section to prepare your appliance for use.
5. A special receptacle is supplied to store the mains plug during transit.
The receptacle is fixed at the back of the cabinet,
on the side of the compressor (see diagram).
Gently remove the plug from the receptacle.
Never pull the mains cord, you may
damage the appliance. In the case of
transportation, ensure you locate the plug in
the receptacle provided to avoid transit
damage.
6. If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction of
black arrow and raised when you turn in the
to slightly lift the refrigerator will facilitate this process.

Changing the illumination Lamp

To change the Bulb/LED used for illumination of your refrigerator, call your Authorized
Service.
The lamp(s) used in this appliance is not suitable for household room illumination. The
intended purpose of this lamp is to assist the user to place foodstuffs in the
refrigerator/freezer in a safe and comfortable way.
The lamps used in this appliance have to withstand extreme physical conditions such as
temperatures below -20°C.
Changing the door opening Direction
Door opening direction of your refrigerator can be changed according to the place you
are using it. If this is necessary, please call your nearest Authorized Service.
6