General safety precautions WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For safe operations: Keep work area clean.
Page 4
Avoid unintentional starting. Do not carry a plugged in tool with a finger on the switch. Ensure switch is off when plugging in. Use outdoor extension leads. When tool is used outdoors, use only extension cords intended for outdoor use. Stay alert.
Model HAG-2011 Rated power 1400W / 2000W Rated voltage 220-240 V Rated frequency 50-60 Hz Flow and temperature 2 mode heating regulation system Airflow / Air tempera- ture mode 1 300 l/min/ 380° С mode 2 500 l/min / 500° С...
prior to operation 1. Power source. Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate. 2. Power switch. Ensure that the power switch is in the OFF position. If the plug is connected to a recep- tacle while the switch is in the ON position, the power tool will start operating immedi- ately and can cause serious injury.
Page 7
NOTE Zenit Power Tools are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts may be changed without prior notice.