Recording Settings; Backlight Setting; Contrast Setting - Samsung YH-925GS Manual

Recording Settings

1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select
Settings, and then press the SEL button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Record Settings,
and then press the SEL button.
3
Use the SCROLL UP/SCROLL DOWN buttons to select Sampling Rate and Bit Rate,
and then briefly press the SEL button to make the desired recording setting.
Complete the desired setting, and then press the MENU button to go to the main menu.
Sampling Rate: Each time the Select button is pressed, the selection toggles
between 32KHz and 44KHz.
Bit Rate: Each time the Select button is pressed, the selection changes as follows:
96 128 160Kbps.
Selecting a higher bit rate results in better quality sound, but uses more memory space.
Settings Record Settings
Repeat-Off SamplingRate
EQ-Off
Bit Rate - 128kbps
SRS Settings
Record Settings
Backlight-5sec
N N o o t t e e
N N o o t t e e
- Voice can be recorded only at 8KHz 32kbps.
58
- 44khz
1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SEL button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Backlight.
3
Press the SEL button until the desired Backlight
On-Time appears.
Off, 3, 5, 10, 15, 30seconds and Always are available for
Backlight-On Time.
1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SEL button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Contrast.
3
Press the SEL button until the desired screen
contrast appears.
The setting range of the contrast, which adjusts the
contrast of the screen, is 0 to 6.
Backlight Settings
Settings
Repeat-Off
EQ-Off
SRS Settings
Record Settings
Backlight-5sec
Contrast Settings
Settings
EQ-Off
SRS Settings
Record Settings
Backlight-5sec
Contrast-3
59