GE Monogram ZDWR240PBS Owner's Manual page 12

For your
safety
Light bulb
replacement
In the event
of a power
failure
Preparing
to move
12
Unplug the wine reserve before cleaning. If the unit is in a built-in location,
remove power at the circuit breaker.
Unplug the wine reserve before replacing
the light bulb. If the unit is in a built-in
location, remove power at the circuit breaker.
If the power fails, open the door as
infrequently as possible to maintain
the temperature. A gradual rise in
temperature should not have any
adverse effect on the wine.
Secure all loose items such as drawers by
taping them securely in place to prevent
damage.
Care and Cleaning
Wine Reserve
To remove the light shield, push in the tab
on the left side of the shield and lower it.
Replace with a 15 watt appliance bulb.
If it is extremely hot, you may want to move
the wine to the coolest location you can find
until power is restored.
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
Be sure the wine reserve stays in
an upright position during moving.