Samsung SyncMaster 400TS-3 User Manuals page 63

3. Enable Drag Delay
This function shows the time in milliseconds "Drag Delay" will take to be enabled after the option is
touched. Drag Delay may be adjusted (in milliseconds) to the correct value if an object cannot be
precisely selected or if the cursor jitters when you touch the touchscreen.
MDC (Multiple Display Control)
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MDC System installation Program.
Note
If the screen for installing the software does not appear, install it using the MDC System execution
file in the MDC folder of the CD-ROM.
3. If the installation wizard screen does appear, click "Next."
4. The "License Agreement" screen will appear. Click "Yes."
5. The "Customer Information" window will appear. Register the user information and click "Yes."
6. The "Choose Destination Location" window will appear. Specify the file location to install to and
click "Next."
Note
If the file location is not specified, the Program will be installed in the default file location.
7. The "Start Copying Files" window will appear. Confirm the file location and click "Next."
Using the Software
Installment
1. Enable Double Click
Double clicking works the same on the
touch screen as it does with a mouse.
Tap an object on the screen twice in
rapid succession to open the object.
"Speed" should be set to 500-550 mil-
liseconds and "Area" to 32 pixels
2. Enable Right Click
Enable the right-click function (de-
fault). Press and hold any part of the
screen for two seconds. The context
menu will appear. The right-click
function is available only in Mouse
Emulation mode. "Delay" should be
set to 1000 milliseconds (1 second)
and "Area" to 32 pixels.