Sony DVP-NS360 Operating Instructions Manual page 18

When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 64.
Notes
• Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems,
it is recommended that the user switch the connection to the 'standard definition' output. If there are
questions regarding our TV set compatibility with this model 525p and 625p DVD player, please contact
our customer service center.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV's input source is set
to the player automatically when you start playback. In this case, press t (TV/video) on the remote to
return the input to the TV.
• If you set "LINE" to "RGB" in SCREEN SETUP (page 25, 64), the player outputs no component video
signals.
18
CD/DVD player
VCR
TV
Connect
directly