Connections
AUX2 : rear Panel
Audio Cable (not supplied)
If the external Analogue
component has only one Audio
Out, connect either left or right.
External Analogue
Component
AUX2 : Connecting an External Analogue Component
Analogue signal components such as a VCR.
1.
Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external Analogue
component.
Be sure to match connector colours.
•
2.
Press the
You can also use the
•
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ B/T ➞ FM.
M
`
You can connect the Video Output jack of your VCR to the TV, and connect the Audio
Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1.
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external
digital component.
2.
Press the
You can also use the
•
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ B/T ➞ FM.
30
AUX button on the remote control to select AUX 2 input.
FUNCTION button on the main unit.
AUX button on the remote control to select DIGITAL IN.
FUNCTION button on the main unit to select D-IN.
OPTICAL : rear Panel
FM ANT
External Digital Component
Optical Cable
(not supplied)
FM ANT