Philips 243S9 User Manual page 8

2. Setting up the monitor
Connecting to your PC
1
1
USB C
USB C-C
USB C-A
1 AC power input
2 HDMI input
3
DisplayPort input
4
USB C
5 Audio out
6 USB downstream/USB fast charger
7 USB downstream
8 Kensington anti-theft lock
7
2 3 4 5 6
8
Fast Charger
2
USB
OR
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB hub
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Sleep and
Power Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to "ON" state. Somehow if
your monitor reset to factory setting,
ensure to select "USB standby mode"
to "ON" state in OSD menu.
USB charging
5
This display has USB ports capable of
standard power output including some
with USB Charging function. You can
use these ports to charge your Smart
phone or power your external HDD, for
example. The display must be powered
ON at all times to be able to use this
function.
6