Resolution Products RE251 Manual

Wireless

Security

Solutions

RE251 Honeywell & 2GIG-Compatible Hidden Panic

Features

• Hidden mounting
• 1-button arming and disarming
• Large, easy-to-differentiate buttons
• Mounts in hidden locations via VHB® tape, or screws
• Strong, reliable RF signal.
• 4-6 year battery life on CR2032 battery.

Key Instructions

• Enrolling:
Refer to the Honeywell control unit installation manual.
Put the control panel in RF Learning mode.
• Each button (or "loop" – see picture) must be
enrolled as a separate zone.
• The Input Type is Button type "BR".
• Press intended button until the Fob LED blinks. Wait
5 seconds and press same button again. Panel knows
what loop each button is when it is pressed (need
not be entered).
• After 2 nd
button press, Panel should indicate
successful learn.
...Or put the control panel in Serial Number entry mode
• Enter the Loop number associated with the intended
key.
• Enter the Serial Number of the device (located on a
label on the unit's back).

Operation

Lock & Unlock buttons simultaneously for 3 seconds
Unlock
LOOP 2
Lock
LOOP 3
RE251_Honeywell-Compat_Hidden_Panic.docPage 1 of 3
www.ResolutionProducts.com
Panic Alarm.
Lock + Unlock
=
Panic (Enroll)
LOOP 1
11-Jun-13

Specifications

Crystal compatible operation
Not supervised.
Replacement Battery: CR2032 Lithium / Manganese Dioxide
Temperature Range: 0F to 120F
Housing dimensions: 3 x 1.2 x 0.52 inches
Specifications subject to change without notice.

Pictures

Battery Replacement

Insert
Screwdriver here
to open
RE251_Honeywell-Compat_Hidden_Panic.docPage 2 of 3
www.ResolutionProducts.com
CR2032 Battery
+ Terminal up
11-Jun-13