Lubix UBHS-NE3 Quick Start Manual

Advertisement

Quick Links

UBHS-NE3 Quick Start Guide

Pairing

While the headset is off, press and hold
Once the headset is in pairing mode, select 'UBHS-NE3' among discovered Bluetooth devices
on the phone and enter the password '0000' to pair the headset.
When being connected , voice prompt is "Connected".

Easy Pairing

UBHS-NE3 supports easy pairing . When pairing , there is no need to enter the '0000'.
※ The other Bluetooth device (host device) also has to support easy pairing.

Power On/Off

Press and hold 'Power/Talk' button for 3 seconds to switch the headset on or off.
Power On/OFF voice prompt is "Hello" / "Bye".

Connecting the Headset

Connecting from the phone: Among registered Bluetooth devices on the phone,
Connecting from the headset: Through auto-connect function, the headset automatically connects
Talk' for 6 seconds to start pairing mode.
'
select
'UBHS-NE3'
to the last device it was connected to when powered on.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UBHS-NE3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lubix UBHS-NE3

  • Page 1 When being connected , voice prompt is “Connected”. Easy Pairing UBHS-NE3 supports easy pairing . When pairing , there is no need to enter the ‘0000’. ※ The other Bluetooth device (host device) also has to support easy pairing. Power On/Off Press and hold ‘Power/Talk’...
  • Page 2 Multi Pairing Multi Pairing Method All Bluetooth devices to be used in multi pairing must be first paired individually using appropriate profiles. (HSP or HFP for phone conversation, and A2DP for high quality audio) ※Each profile cannot be used to connect more than one device simultaneously. See ‘Notice’ below for more details. ※The auto connect function of the headset will connect each profile to the last connected device.
  • Page 3 Making Phone Calls Voice dial: Press the ‘Talk’ button once to activate voice dial. ※ Some phones might not support this function. Last Number Redial: Double click ‘Talk’ button to redial last number. Answer a call: When receiving a call, press ‘Talk’ button to answer the call. Ending a call: While talking on the phone, press ‘Talk’...
  • Page 4 3D Sound Using 3D Sound 5 types of 3D sound effect are programmed in the order below. While in Play/Pause mode, double click the ‘▶II’ button to select the 3D sound effect of your choice. Types of 3D Sound Effect 1.
  • Page 5 LED Light Messages Headset Status LED Status Powering on Blue LED light is on Powering off Red LED light dims and disappears Low battery Red LED light continues to blink Recharging Red LED light stays on Recharging complete Blue LED lights stays on Pairing Mode Blue and Red LED lights flash rapidly Connection complete...
  • Page 6 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents