Table of Contents
Advertisement
Use the AV Video Source (only for 8960A5/A7)
If the Transmitter Box has connected to the AV video source such as DVD or STB, and it also connected IR
Blaster cable and completed IR learning (please refer to the operation instructions of Transmitter Box), you
can control the AV programs by following the steps:
1.
Press "
" on the remote control to switch the video source
to AV source.
2.
Triple press "0" key on the remote control (in one second
interval), it will display
✍
Because remote control orders must transmit to Transmitter,
then transform to IR signals to control the extern devices, and
the extern devices also have response time, so there will be
5~10 seconds delay (depends on your network condition).
The remote control of Receiver Box and the virtual remote
control are not exactly corresponding (as right, keys with the
same number is corresponding). The direction keys and pause
key on the virtual remote control can't be corresponding.
on the screen.
<<
17
>>
Advertisement
Table of Contents
