Table of Contents
Advertisement
Settings
If you tap Use specific IP address, you need to set IP address assigned by your WLAN service provider
v
or network administrator.
Fill in IP address, Subnet mask, and Default gateway.
v
Tap Name Servers.
v
Fill in DNS and Alt DNS, WINS and Alt WINS, if necessary.
v
Note
To prevent possible data loss on your device, WLAN will turn off when the battery level is under five
percent.
To check WLAN status
Tap Start > Settings > Connections tab > Wireless LAN. You can check the
v
current WLAN connection status from this menu.
Main tab
v
Shows the information of the wireless network that device is currently
connected to.
Station tab
v
Shows IP and MAC addresses of Wi-Fi network adapter in device.
Statistics tab
v
Shows you the statistics information of current WLAN session.
Preference tab
v
View preferred network list and delete them.
Location tab
v
Select your region. (Recommended value is "ALL CHANNELS" which is default value.)
164
Advertisement
Table of Contents
