LG NTLU20 User Manual page 19

1. Power: Power status indicator indicates the following status of the
computer.
Green: The computer is turned on.
Off: The computer is turned off or is in hibernation mode.
Blinking: The computer is in standby mode.
2. Drive in use: Drive in use indicator lights up when data is being written to
or read from the hard disk.
3. Wireless activity indicator: Wireless activity indicator indicates the
following.
Off: The wireless card does not have the power or RF is off.
Blinking: The wireless client is not associated with the network. Slow
blinking (3-4 seconds interval): the wireless card powered on and
attempting to connect.
Fast blinking: The wireless card transmitting and/or receiving data by the
rate depending on blinking speed.
4. Num lock: Num lock indicator lights up when the combination of the Fn and
Num lock key is pressed. When this indicator lights up, you can use the
embedded numeric keys. (To use the numeric keys, you must enable the
Internal Keypad setting under the Advanced menu in the BIOS Setup
Utility)
5. Caps lock: Caps lock indicator lights up when the Caps lock key is pressed.
When this indicator lights up, you can type capital letters without pressing
the Shift key.
6. Battery: Battery status indicator indicates the following status of the
battery.
Off: The computer is not connected to an AC adapter and the battery is
discharged.
Amber (orange color): The computer is connected to an AC adapter and the
battery is charged. (0% ~90%)
Amber and Green (blinking) : The battery is nearly full charged (90~100%)
Green: The computer is connected to an AC adapter and the battery is fully
charged
Red: There is some problem in the battery.
Green blinking: The battery is fully discharged.
Green blinking for three times: The battery is fully discharged / Pressing
the power button when system is off
- 24 -