Switching On and Off
Placing in Standby Mode
English-14
The mains lead is attached to the rear of your set.
If you purchased this set in the United Kingdom,
refer to page 62 for further instructions on plug wiring.
1
Plug the mains lead into an appropriate socket.
Result:
When the adaptor is plugged in, the LED turns red.
2
Press the
POWER button to switch on.
3
To switch off, press the
Your set can be placed in Standby mode in order to reduce the
power consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the
POWER button.
2
To switch back on, simply press the
or a numeric button.
Do not leave your set in Standby mode for long periods of
time (when you are away on holiday, for example).
Turn off by pressing the
It is best to unplug the set from the mains and aerial.
POWER button again.
POWER button again
POWER button.