FLEET HOSTER ATS01-96 Installation Manual

FLEET HOSTER ATS01-96 Installation Manual

Advertisement

Quick Links

Thank you for purchasing this high-quality GPS tracker from Fleet Hoster. Please read this user
manual carefully before installation and operation. Information in this manual is the property of
Fleet Hoster. Changes to the specifications and features in this manual may be made by Fleet
Hoster without prior notice. No part of this manual can be reproduced, copied, translated,
transmitted, or published in any form or by any means without Fleet Hoster's prior written
permission.
ATS01-96
The tracker is using GNSS & LTE technologies that collect device coordinates and
transfer them via LTE network to the server. It provides the customer with cost-
effective, efficient and safety management. It has been widely used in commercial
transportation, company vehicle fleet management, intelligent transportation,
logistics, car rental, engineering machinery, marine transportation, animal/pet
tracking and other segments.

Remember

ATS01-96 obtains power through sunlight to extend the battery life.
Please make sure that the device is exposed to direct sunlight every day. This will be
very useful to extend the battery life. If the device is not charged for more than three
months, it may cause permanent damage to the internal battery.
Please make sure the device is fully charged before installation.
Only when the solar panel output voltage value is 0.3V higher than device
battery voltage value, the solar panel will start to charge the battery. Otherwise,
the solar charging will stop.
To ensure the battery life for a longer period, please be careful when setting the
reporting intervals. Lower reporting rates will maintain the balance between the power
consumption and gaining (from solar panel). We usually recommend to set the tracker
reporting ≥every 5 mins when moving, and ≥every 1 hour when standstill. Customer
may also contact Fleet Hoster for further advice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATS01-96 and is the answer not in the manual?

Questions and answers

Summary of Contents for FLEET HOSTER ATS01-96

  • Page 1 Information in this manual is the property of Fleet Hoster. Changes to the specifications and features in this manual may be made by Fleet Hoster without prior notice. No part of this manual can be reproduced, copied, translated, transmitted, or published in any form or by any means without Fleet Hoster's prior written permission.
  • Page 2 It can save clients the time and effort of updating firmware manually. Please note that this feature is enabled by default. If you want to turn it off, please contact Fleet Hoster. If this feature is disabled, the fw update can only be done by sending the upgrade command manually.
  • Page 3 1 back light sensor Temperature Sensor 1 temperature sensor BLE 5.0 General Specifications Waterproof IP67 Dimensions 85mm*185mm*31 mm (3.35” *7.28” *1.22”) Weight 370g (13oz) Battery Rechargeable Li-Polymer 9600 mAh/ 3.6V Copyright © Fleet Hoster. 2021 – All Rights Reserved | www.fleethoster.com...
  • Page 4 USB cable-for charging LED indicator Note: Indicator lights will go out automatically after the tracker turns on for 70 seconds without connecting to the external power via USB cable. Copyright © Fleet Hoster. 2021 – All Rights Reserved | www.fleethoster.com...
  • Page 5 If the battery runs out completely, only when the battery is charged to 3.5V, the device will power on again. Copyright © Fleet Hoster. 2021 – All Rights Reserved | www.fleethoster.com...
  • Page 6 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Copyright © Fleet Hoster. 2021 – All Rights Reserved | www.fleethoster.com...

Table of Contents