Summary of Contents for Industrial Controls IP Series
Page 1
The Series IP I/P Current to Pressure Transducer Installation, Operation and Maintenance Instructions Pilot Pressure Supply Pressure Atmospheric Pressure Output Pressure Description & Installation Operation Maintenance Troubleshooting 1.888.610.7664 www.calcert.com sales@calcert.com...
DANGER, WARNING, CAUTION and NOTE statements DANGER Refers to conditions or hazards which could result in serious personal injury or death. WARNING Refers to conditions or hazards which could result in personal injury. CAUTION Refers to conditions or hazards which could result in equipment or property damage. NOTE Alerts you to facts or special instructions.
1.4 Pneumatic Connections 1.4.1 The 1/4 NPT supply and output ports are marked “IN” and “OUT” respectively on the base of the unit. Clean all pipe lines to remove contamination before installation. Apply pipe compound to male threads of the air line only. Avoid getting compound in the air lines.
3. MAINTENANCE Under normal circumstances, no maintenance should be required. If clean dry air is not used the orifice can become blocked. To clean, first turn off supply air, unscrew and remove orifice assembly. The unplug orifice by using a wire that has a smaller diameter than 0.015 in.