Table of Contents
Advertisement
5
Send to send the message.
Select
If you decide not to send a message immediately, you
●
can save it to the draft folder for future use.
If an error occurs while you are sending a message, it
●
will be saved in the outbox so you can try to resend it
later.
When a message is sent successfully, it will be saved in
●
the sentbox.
›
Set up an MMS profile
To send and receive multimedia messages, you must activate
a connection profile for connecting to the MMS server. In
addition to profiles that are preset by your service provider,
you can add your own connection profile.
1
In Menu mode, select
Network
2
Create.
Select
3
Customise the parameters for the connection profile.
Option
Set name
Access name
Auth type
User ID
Password
Protocol
Home URL
Settings
→
Connections
Function
Enter the name for the profile.
Enter the access point name.
Select an authentication type.
Enter your user name.
Enter your password.
Select a network protocol.
Enter the MMS server address.
Communication
Connectivity
→
→
Yes.
46
→
Advertisement
Table of Contents
