Table 45: Required Washers (01); Table 46: Tightening Torque (57005) - ABB XAC18513 Operation Manual

Operation Manual / 4 Product description / A100-L
9 Taking a turbocharger out of operation / 9.3 Procedure with one in-
stalled turbocharger
Product
A165-L
A170-L
A175-L
A180-L
A185-L
A190-L
Table 45: Required washers (01)
Part number A165-L
57005 M12
50 Nm
Table 46: Tightening torque (57005)
1. Remove screws (57005).
2. Fit and tighten screws (57005) with high-temperature grease and washers (01) in accord-
ance with the table.
9.3.4 Continuing to operate the engine
Continue to operate engine in accordance with enginebuilder's instructions. Do not exceed
prescribed power reduction and maximum turbocharger speed.
© Copyright 2017 ABB. All rights reserved.
h [mm]
3.5 ... 4.0
3.5 ... 4.0
4.0 ... 5.0
4.0 ... 5.0
4.5 ... 6.0
4.5 ... 6.0
A170-L A175-L
M12 M16
50 Nm 80 Nm
HZTL4034_EN
d1 [mm]
13
13
17
21
21
25
A180-L A185-L
M20 M20
160 Nm 160 Nm
Revision K
d2 [mm]
20
20
28
34
34
39
A190-L
M24
280 Nm
June 2017