ADB A2100N User Manual page 10

Press "Next" entering the configuring interface, as Figure3.9.

PPP Username: Your account from ISP to access Internet.

PPP Password: Input the password assigned by your ISP.

PPPoE Service Name: Server name of network ISP. No need to set.

Authentication Method: Authentication mode of network ISP. Default is AUTO.

Dial on demand: When this mode is selected, the connection that has no traffic within assigned
disconnect timeout (e.g. 1 minute) will be automatically disconnected. The connection will be activated
again when traffic arrives. This function is advantageous for users who are charged with online time. It
should be noticed that some programs automatically link to Internet. Computer will send data to network
when infected by virus. Connection will not be disconnected under these data streams.

Inactivity Timeout: When "Dial on demand" is selected, this input box indicates that after how
long the connection will be disconnected in the absence of traffic. If the value is 0, connection will not be
disconnected.

Enable manual MTU set: set MTU value manually by yourself

Manual Connect:connect/disconnect PPPoE connection manually
Press "Next" to select default gateway from Routing Interfaces:
Figure 3.9
Page 10
DSL Gateway/Router — User Manual
Total 21 Pages