Table of Contents
Advertisement
•
In normal display condition to press any key except power key more than 3
seconds to trigger "OSD Unlock".
•
The "OSD Unlock" message will be displayed in the middle of the screen.
•
LED lights will be restored to blue light.
System
Mode - Standard
Picture
Input
Color
Auto Source
Audio
Wide Mode
Performance
Hot Key Assignment
OSD
DDC/CI
System
HDMI Black Level
Information
Quick Start Mode
1.
Press the MENU key to open the OSD.
2.
Press up or down button to select System from the OSD. Then press enter button to
enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from VGA IN, HDMI, DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
Note: Surround application must set Auto Source is "Off".
6.
Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
7.
Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Blue Light, Over Drive, VRB) and shortcut keys 2 (Modes, Volume,
Brightness, Gamma, Contrast, Blue Light, Over Drive, VRB).
8.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9.
HDMI Black level: Select to set HDMI black level.
10. Quick start mode: Select Off or On. Turn on to speed up boot speed.
HDMI
On
Full
On
Normal
Off
Advertisement
Table of Contents
