Using Smart Diagnosis - LG F4J6AM2W Owner's Manual

Smart Diagnosis™ Using a
Smart Phone
• For appliances with the
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails.
Smart Diagnosis™ can not be activated
unless the appliance is connected to power.
If the appliance is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis™.

Using Smart Diagnosis™

Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate
diagnosis by an LG Electronics service
centre when the product malfunctions or fails.
Use this function only to contact the service
representative, not during normal operation.
1
Press the Power button to turn on the wash-
ing machine. Do not press any other buttons or
turn the programme selector knob.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to the
Power button.
3
Press and hold the Temp. button for three
seconds, while holding the phone mouthpiece to
the icon or Power button.
or logo
4
Keep the phone in place until the tone trans-
mission has finished. Time remaining for data
transfer is displayed.
• For best results, do not move the phone while
the tones are being transmitted.
• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
5
Once the countdown is over and the tones
have stopped, resume your conversation with
the call centre agent, who will then be able to
assist you using the information transmitted for
analysis.
NOTE
• The Smart Diagnosis™ function depends on
the local call quality.
• The communication performance will improve
and you can receive better service if you use
the home phone.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
LG Electronics
service centre
EN
35