Table of Contents
Advertisement
PARTS, TOOLS, MATERIALS
You will need the following tools and materials for the installation:
Carton or other heavy material for covering the counter top.
Clear Tape
(for taping the templates to the wall)
(for cutting vent holes for roof
or wall venting)
Phillips Screwdriver
Flat Blade Screwdriver
Measuring Tape
Small Side Cutters or Tin Snips
If you have brick or masonry walls, you will need special hardware and tools.
●
The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft damper.
●
(Shown on page 5).
Saber Saw
Pencil
Gloves
Keyhole Saw (for the power cord hole)
3/8" and 3/4" wood drill bits
1/2" and 3/16"
drill bits
– 6 –
Stud Finder
Electric Drill
Plumb Line
Duct Tape
Caulking Gun
Advertisement
Table of Contents
