System Settings; Music; Record; Display - ZVue Sprit User Manual

System Settings

From the main menu, highlight the
option and press the MENU

Music

Repeat mode –
Once –
Plays current track only once.
Repeat 1 – Repeats current track on a loop.
Folder Once –
Plays all tracks in folder only once.
All Once – Plays all tracks only once.
All Repeat – Repeats all tracks on a loop.
Intro –
Plays only first seconds of each track.
Play Mode -
Order - Play all tracks in order.
Shuffle – Play all tracks in a random order.
EQ Select –
Offers a variety of preset equalizer settings. Choose a setting
that best compliments your music preference or tastes. This includes the
"User EQ" setting, which is set in the next system setting menu item.
User EQ Set –
This option offers your several sound frequency ranges
to adjust. Use the and to adjust the currently highlighted frequency
band. Press VOL to confirm your setting for that frequency band and
continue to the next. Once you have set all of the frequency values to
your liking press the MENU button to return to the main menu.
9
System Settings
(
button to confirm your selection.
System Settings
)

Record

REC Quality –
more storage per second of recording.
REC Volume
some experimentation to determine which setting is best for you in your
recording environment.

Display

Backlight -
turns off. Settings are: 5, 10, 15, 20, and 30 seconds. This also includes
"Always On", which will leave the backlight on for the entire time the player
is powered on.
Brightness –
1 through 5, with 5 being the brightest setting.

System

About –
Displays the version number of the firmware, the date of the firm-
ware, as well as storage available and total capacity of the player's storage.
Upgrade –
player. This should only be used under the instruction of a ZVUE customer
service agent.
Default Set –
factory settings. This will not affect the preloaded content of your player.
High Quality or General Quality. The higher quality uses
– This sets the sensitivity of the microphone. This may take
Set the amount of inactivity in seconds before the backlight
This is the brightness setting. This includes settings labeled
This is a feature to allow you to upgrade the firmware of the
This option returns all of the player settings to their default
10