Murata HN-210D User Manual

Rs-232 serial modbus

Hide thumbs Also See for HN-210D:

Manual (59 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

Revision History

Revision

Date

05/03/2012

01/16/2015

01/13/2017

HN-210D/X, HN-214 D/X Rev. 2.0 01-13-17

Author

Change Description

F. Perkins

Initial issue

R. Willett

Reformatted to comply with new Murata V.I.

Updated Copyright

R. Willett

HN-210D/X

HN-214D/X

RS-232

Serial Modbus

Radio

User Guide

www.murata.com

Table of Contents

Need help?

Do you have a question about the HN-210D and is the answer not in the manual?

Questions and answers

Summary of Contents for Murata HN-210D

Page 1 Author Change Description 05/03/2012 F. Perkins Initial issue 01/16/2015 R. Willett Reformatted to comply with new Murata V.I. 01/13/2017 Updated Copyright R. Willett Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2012 www.murata.com HN-210D/X, HN-214 D/X Rev. 2.0 01-13-17...
Page 2 RF exposure limits may be exceeded if personnel come closer than 20 cm to the apertures of any of these antennas. Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2012 www.murata.com HN-210D/X, HN-214 D/X Rev. 2.0 01-13-17...
Page 3 Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2012 www.murata.com HN-210D/X, HN-214 D/X Rev. 2.0 01-13-17...
Page 4 ≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡ For our Customers who wish to use this product in hazardous locations. The HN-210D, HN-210DX, HN-214D and HN-214DX radios have been tested by Underwriters Laboratories Inc. for use in Class I, Division 2, Groups A, B, C, and D Hazardous Locations as specified in UL1604 and UL/C-UL/Zones(UL2279).
Page 5: Table Of Contents
Network Commands ....................38 Protocol Commands ....................41 Status Commands ...................... 44 Memory Commands ....................46 Adapter Commands ....................47 Modem Command Summary ..................48 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2012 www.murata.com HN-210D/X, HN-214 D/X Rev. 2.0 01-13-17...
Page 6 Factory Repairs ...................... 53 Technical Specifications ....................54 Electrical ........................ 54 Mechanical ......................55 Environmental ......................55 Glossary of Terms ......................56 Warranty ........................58 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2012 www.murata.com HN-210D/X, HN-214 D/X Rev. 2.0 01-13-17...
Page 7: Introduction
The HN-210D and HN-210DX are NEMA 4X weatherproof versions of the HopNet product line. The HN-214D, which is a HN-210D with a 4 ft. cable, is also available. The interface to the HopNet D and DX versions allows the Host to communicate with the Remote unit through an integrated 50 ft (15 meter) cable.
Page 8: Hopnet Frequency Hopping Spread Spectrum Advantages
This feature also allows HopNet products to be used in various countries where the output power requirements may vary due to regulation. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 8 of 64...
Page 9: Advanced Features
The HopNet family consists of the following products: HN-210 HN-210X HN-210D HN-214 HN-214X HN-210DX HN-214D HN-214DX HN-510 SNAP2410 SNAP2410X SNAP2410D SNAP2410DX Accessories Antennas Adapter Power Supplies Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 9 of 64 www.murata.com...
Page 10: Getting Started
Connect the HopNet radio to the PC. Plug one end of the serial cable provided to a serial port on the PC. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 10 of 64...
Page 11: Set One Hopnet Radio To Act As The Base
The HopNet Configuration Wizard will automatically detect which serial port the HopNet radio is connected to and its baud rate. When the radio has been detected, the Continue button will appear. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 11 of 64...
Page 12 To set the HopNet radio as a base, click on the Base button. The Base button will depress and the Remote button will pop up. The screen heading will change from “Remote Parameters” to “Base Parameters.” Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 12 of 64...
Page 13: Run A Communications Test
Wizard. Open the second window by simply double-clicking on the Wizard icon on your desktop. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 13 of 64...
Page 14: The Serial Adapter Box
3-wire mode. In this mode, only Ground, Receive Data and Transmit data are connected. The connector pinout is provided below. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 14 of 64...
Page 15: Remote Pin-Out, Rs-232
Not Used NOTE: When the HopNet radios are used as three wire serial devices, DTR and RTS do not have to be used. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 15 of 64...
Page 16: Guidelines For Installation
The cable may be lengthened by adding an additional 50’ cable (part no.: CBLEXT50). The maximum cable length that the HopNet radios will support is 100’ (30 meters). Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 16 of 64...
Page 17: Configuring The Network
In the bottom left corner of the Wizard window, the Base/Remote status, the serial number and the communication port are always displayed. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 17 of 64...
Page 18: About The Init.ini File
0 (default) = Shows minimum amount of options. 1 = Adds all other options. 2 = Adds WinCom. AutoDetect=1 1 = Auto-detects radio, 0 = User-defined inputs Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 18 of 64 www.murata.com...
Page 19: Parameters Tab
1. Base or Remote 2. Point-to-Point or Multipoint 3. Baud rate 4. Network number 5. Lockout Key 6. Roaming Mode 7. Protocol Mode Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 19 of 64 www.murata.com...
Page 20 Also known as Set Data Rate Divisor (command ) this parameter sets the serial bit rate between the modem and the host. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 20 of 64...
Page 21 When using a protocol mode, make sure to count in packet overhead when calculating network performance. Refer to the section on Protocol Modes for details on each format. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 21 of 64...
Page 22 The Send Data button (shown below) initiates the transmission of data. Default The Default button (shown above) returns all parameters to Factory settings. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 22 of 64...
Page 23: Network Tab
The length of time the radio will wait is equal to the specified value times the hop duration. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 23 of 64...
Page 24 Using this mode in a point-to-multipoint system will stop transmissions to all radios when any one radio has a full buffer. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 24 of 64...
Page 25 NOTE: If the hop speed is too fast, there may not be time to send a long packet on a single hop. Refer to the Protocol Commands section of this manual for details on these commands. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 25 of 64 www.murata.com...
Page 26: Protocol Tab
The Protocol tab brings up the configuration screen above. On the next page are descriptions of the commands/parameters that are available for modification. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 26 of 64...
Page 27 Because of the built-in antenna of the HopNet radio, the 10mW power setting must be used when operating in an EU country. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 27 of 64...
Page 28: Rf Tools
Simply click on the radio button opposite Range Optimization and the following screen will display. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 28 of 64 www.murata.com...
Page 29 Range Optimization radio button will clear and the Done radio button will fill in indicating that adjustment factor has been applied. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 29 of 64...
Page 30 This function will display on a channel basis, the strength of the signal received from the base by the remote. The values on the Y-axis are only approximate and should not be used as absolute reading values. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 30 of 64...
Page 31 Over time, one can see clearly how different channels are affected to differing degrees. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 31 of 64...
Page 32: Wincom Window
WinCOM, verify the COM port and baud rate settings, then reset the radio (by hitting F1 twice). Cycling power to the radio also will cause the sign on banner to be displayed. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 32 of 64...
Page 33 WinCom window as shown above. Configuration parameters are sent to the radio by entering them in the WinCom window after the “>” prompt and pressing the Enter key. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 33 of 64...
Page 34 Similarly, if the Hex Mode box is checked, all characters are displayed in hexadecimal format. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 34 of 64...
Page 35: Function Keys
Apply Settings button is clicked, all the changed values will be loaded into the radio, even if the changed values are not on the tab currently displayed. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 35 of 64 www.murata.com...
Page 36: Restart
During communications on a Modbus network, the protocol determines how each controller will Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 36 of 64 www.murata.com...
Page 37 It has no concern for the content of the message, the function of the message, or the ultimate purpose of the message. For example, with full-duplex DF1 Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 37 of 64 www.murata.com...
Page 38: Modbus Operation
The HopNet radio’s default data transmit delay is 45msec from the start of the packet, then transmits and continues to stream the information to the remote. At slower baud Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 38 of 64 www.murata.com...
Page 39: Automatic Addressing
DF1 in full-duplex mode is not supported. Note: The HN210D radio must be in broadcast mode in order to use both the DNP3 and DF1 protocols. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 39 of 64...
Page 40: European Union Operation
This can be set using the Wizard on the Protocol tab or through the WinCom tab using the command. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 40 of 64 www.murata.com...
Page 41: Configuration Commands
When these commands are entered from the main or advanced Wizard screen, the Wizard will insure the proper syntax is used. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 41 of 64...
Page 42: Serial Commands
Nonstandard rates may be programmed by entering a data rate divisor computed with the following formula: DIVISOR = (230400/RATE)-1 Round all non-integer values down. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 42 of 64 www.murata.com...
Page 43 When using a protocol mode, make sure to count in packet overhead when calculating network performance. Refer to the section on Protocol Modes for details on each format. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 43 of 64...
Page 44: Network Commands
When 3FH is specified for the base, broadcast mode is entered. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 44 of 64...
Page 45 This mode fixes the remote handle assignment to always be 30H and improves the re-registration process. Must be set in both base and remote radios. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 45 of 64...
Page 46 5.0mi/8.3km 5.8 mi/9.7km 6.4mi/10.7km 7.0mi/11.7km 7.8mi/13.0km 9.4mi/15.7km 10.0mi/16.7k 10.8mi/18.0km 19.4mi/32.3k 20.0mi/33.3k 20.8mi/34.7km 24.4mi/40.7k 25.0mi/41.7k 25.8mi/43.0km Optimal 'dx' setting for various distances. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 46 of 64 www.murata.com...
Page 47: Protocol Commands
1 = ARQ disabled (redundant transmission) NOTE: Incorrect setting of these parameters may result in reduced throughput or loss of data packets. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 47 of 64...
Page 49 34H which corresponds to 208 bytes. If using a protocol mode, attempting to send a packet with a length longer than this setting will cause the packet to be discarded. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 49 of 64 www.murata.com...
Page 50: Status Commands
N. zq[?|0|1] Low Power Acquisition Mode Enable 0 = Disabled (default) (remote only) 1 = Enabled z> Exit Modem Control Mode Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 50 of 64 www.murata.com...
Page 51 40mA. The tradeoff is it can take twice as long to acquire and register with a base, or up to 4 seconds. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 51 of 64...
Page 53: Adapter Commands
If not, an error may occur. If the end of the packet arrives before the time expires, the data is released early. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 53 of 64...
Page 54: Modem Command Summary
Display Modified Settings Adapter Commands Protocol Mode QP[0|1|2] Maximum Transmit Delay QD[value x 3ms] Adapter Wiring Mode QW[0|1|2] Serial Data Options QS[0|1..8] Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 54 of 64 www.murata.com...
Page 55: Troubleshooting
For proper operation, all transceivers in the network must meet these basic requirements: Adequate and stable power Secure connections (Power, RF, and Data) Proper programming especially Hop Duration and Network Number Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 55 of 64 www.murata.com...
Page 56: Common System Problems
This will often limit interference to and from other stations. 3. Check RSSI value at the remote. A low value would correspond to weak signal strength. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 56 of 64 www.murata.com...
Page 57: Guidelines For Reducing Interference
• Aiming the antenna — Use the sticker on the CR-HN remote unit to help you locate and aim the antenna. The sticker indicates which direction the antenna is pointing. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 57 of 64...
Page 58: Guidelines For Avoiding Terrain Obstructions
ARQ is enabled and the radio automatically and transparently will resend data that was not received on the first attempt. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 58 of 64...
Page 59: Customer Support
Please be sure to carefully package all items to be returned and address to: Murata Electronics, N.A., Inc. 4441 Sigma Road Dallas, TX 75244 RMA # *** Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 59 of 64 www.murata.com...
Page 60: Technical Specifications
6 dB to the link budget and -99dBm sensitivity) RS-232 Data Interface 9 - 30 VDC Operating Input Power at Connector 160 mA Typical (750 mA surge) Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 60 of 64 www.murata.com...
Page 61: Mechanical
RJ-45 Interconnect Cable Connector Environmental Specification Value -30 to +70 degrees C Temperature Range 95% at +40 degrees C, Non-condensing Humidity Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 61 of 64 www.murata.com...
Page 62: Glossary Of Terms
“hops” from one frequency to the next in discrete steps. The receiver must be programmed to follow the transmitter’s frequency hops. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 62 of 64...
Page 63 Transparent transmission is used to communicate non-text data where a data word in the text field could be confused with a control character. Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 63 of 64...
Page 64: Warranty
SALE OR SUPPLYING OF THE GOODS. THE FOREGOING WARRANTY EXTENDS TO BUYER ONLY AND SHALL NOT BE APPLICABLE TO ANY OTHER PERSON OR ENTITY INCLUDING, WITHOUT LIMITATION, CUSTOMERS OF BUYERS Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012 HN-210D/X, HN-214D/X Rev. 2.0 01/13/17 64 of 64...

This manual is also suitable for:

Hn-210dx Hn-214d Hn-214dx

Murata HN-210D User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Murata HN-210D

Summary of Contents for Murata HN-210D

This manual is also suitable for:

Table of Contents