Specifications; Warning Labels On The Machine; Symbols On The Machine - Komatsu Zenoah BCZ3200DW Owner's Manual

BCZ3200DL / BCZ3200DW
2. Specification
BCZ3200DL / BCZ3200DW
Overall size (L 3 W 3 H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm
Dry weight .................................................................................................. 5.7 / 6.1 kg
Engine
Model ............................................................................................ Zenoah GZ30N
Displacement ........................................................................................... 29.5 cm
Fuel ............................................................................ Mixture (Gasoline 50 : Oil 1)
Carburetor .................................................................................... Diaphragm type
Ignition system ........................................... Transistor controlled flywheel magneto
Spark plug .......................................................................................... NGK CMR7H
Fuel tank capacity ............................................................................................... 0.72 L
Starter ...................................................................................................... Recoil starter
Clutch .................................................................................................. Centrifugal type
Reduction ratio .................................................................................................... 1.462
Cutting head rotating direction ............................. Counter-clockwise (Operator view)
Specifications are subject to change without notice.
3. Warning labels on
the machine
Read owner's manual before operat-
ing this machine.
Wear head, eye and ear protection.
Warning / Attention
Keep all children, bystanders and helpers 15
meters away from the machine.
GB-4
(when using ZENOAH genuine oil)
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Never modify your machine.
We won't warrant the machine, if you use the
remodeled brushcutter or if you don't observe
the proper usage written in the manual.
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
3