Table of Contents
Advertisement
LSX300-4DM_OM (Zenith)
Connections with TV and
over-the-air antenna
1. Connect the antenna to the "ANTEN-
NA IN" jack on this unit using a coaxi-
al RF cable (N).
2. Connect the "ANTENNA OUT" jack on
this unit to the "Antenna In" jack on
your TV using a coaxial RF cable (R).
Your TV must be tuned to the select-
ed RF channel (3 or 4 channel) to dis-
play the picture. (default: 4 channel)
Connect the VIDEO and AUDIO OUT-
PUT jacks on this unit to the video
and audio input jacks on the TV using
the video (V) and audio (A) cable.
3. Plug the power cord into a power
strip/surge protector or a wall outlet.
TV
Antenna
ANTENNA
N
R
Rear of this unit
Connections with TV and Smart
Antenna (Optional)
Before connecting, ensure the AC power
cord is NOT connected to the AC outlet.
To connect the Smart Antenna, refer to
your Smart Antenna's manual for details.
1.
Use a 75 ohm coaxial antenna cable
to connect the Smart Antenna to the
TO ANTENNA jack on the control box.
6
7/16/07
2:30 PM
OR
INPUT
A
V
Page 6
2.
Use another 75 ohm coaxial antenna
cable to connect the TO TV (STB)
jack on the control box to the ANT. IN
jack on this unit.
3.
Use the Smart Antenna control cable
to connect the ANTENNA CONTROL
jack on the control box to the
SMART ANT. jack on the UNIT.
4. Connect the "ANTENNA OUT" jack on
this unit to the "Antenna In" jack on
your TV using a coaxial RF cable (R).
Your TV must be tuned to the select-
ed RF channel (3 or 4 channel) to dis-
play the picture. (default: 4 channel)
OR
Connect the VIDEO and AUDIO OUT-
PUT jacks on this unit to the video
and audio input jacks on the TV using
the video (V) and audio (A) cable.
5. Plug the power cord into a power
strip/surge protector or a wall outlet.
Smart Antenna
TV
ANTENNA
INPUT
R
Rear of this unit
Control box
A
V
Advertisement
Table of Contents
