Zenith H20H52DT Installation And Operating Manual page 36

Zenith lcd hdtv installation and operating guide
Table of Contents

Advertisement

Installer Menus
Installer Menu Item 28-I through 59-I: Detailed Descriptions.
28-I. CH. OVERRIDE (Channel Override)
When set to 1, the user can select channels with
either Channel Up/Down or by direct keypad entry.
When set to 0, only those channels that are
entered for scanning may be selected by direct
keypad entry. Note: If set to 0, Auto Program is
locked; (as shown on Setup menu) channel
search is not possible.
29-I. OLD OCV (On Command VideoTM)
Set to 1 for operation with systems from On
Command Corporation.
30-I. ACK MASK
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider.
31-I. POLL RATE
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider
32-I. TIMING PULSE
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider.
33-I. NOT USED
34-I. NOT USED
35-I. NOT USED
36-I. NOT USED
37-I. NOT USED
38-I. NOT USED
39-I. REAR VIDEO EN.
Set to 1 to enable rear AUX (Video) input.
Set to 0 to disable rear AUX input.
40-I. NOT USED
41-I. NOT USED
42-I. NOT USED
43-I. NOT USED
44-I. NOT USED
45-I. NOT USED
Page 36
46-I. NOT USED
47-I. NOT USED
48-I. DIS. SETUP M.
Set to 1 to disable the Setup menu. Setup menu
will not appear. Set to 0 to enable the Setup menu
49-I. NOT USED
50-I. DIS. VIDEO M.
Set to 1 to disable the Video menu. Video menu
will not appear. Set to 0 to enable the Video menu.
51 DIS. VCHIP M.
Set to 1 to disable the Parental Control menu.
Parental Control menu will not appear.
Set to 0 to enable the Parental Control menu.
52-I. NOT USED
53-I. DIS. CH-TIME.
Set to 1 to disable the Channel-Time display.
Channel-Time display will not appear.
Set to 0 to enable the Channel-Time display.
54-I. EN. SET. COL.
Set to 1 to enable custom color settings for the
Setup menu. Set to 0 to disable custom color
settings for the Setup menu.
55-I. FOR. SETUP M. (Setup Menu Foreground
Color)
Set according to Color Chart.
0 = Black
3 = Yellow
1 = Red
4 = Blue
2 = Green
5 = Violet
56-I. BCK. SETUP M. (Setup Menu Background
Color)
Set according to Color Chart.
0 = Black
3 = Yellow
1 = Red
4 = Blue
2 = Green
5 = Violet
57-I. NOT USED
58-I. NOT USED
59-I. NOT USED
6 = Cyan
7 = White
6 = Cyan
7 = White

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hw20h52dt

Table of Contents