Cleaning and maintenance Defrosting the fridge Replacing the LED light Transportation and repositioning Troubleshooting Energy saving tips Parts of the appliance Installation instructions Electrical connection Technical product fiche Caple contact details Please keep this instruction manual for future reference Instruction manual RBL4...
- Whilst carrying and positioning the fridge, take care not to damage the cooler gas circuit. Please keep this instruction manual for future reference Instruction manual RBL4...
Page 4
- If the socket does not match the refrigerator plug, it must be replaced by a Caple approved engineer or similar qualified persons in order to avoid a hazard. - This appliance is not intended for use by persons...
Page 5
- This appliance is produced for domestic use only. It is not suitable for commercial use. Such use will cause the guarantee of the appliance to be invalid and Caple will not be responsible for losses incurred. Please keep this instruction manual for future reference...
Page 6
- Do not cover the body or top of fridge with lace. This affects the performance of your fridge. - Fix the accessories in the fridge during transportation to prevent damage to accessories. Please keep this instruction manual for future reference Instruction manual RBL4...
- Place your fridge in a place where it won’t be exposed to direct sunlight. - Your fridge should never be used outdoors or left in the rain. - Your appliance should be at least 50 cm away from hobs, Please keep this instruction manual for future reference Instruction manual RBL4...
Page 8
- Install the distance adjustment plastic (the part with black vanes at the rear) by turning it 90° as shown in the figure to prevent the condenser from touching the wall. Please keep this instruction manual for future reference Instruction manual RBL4...
Page 9
CE DECLARATIONS OF CONFORMITY This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC). Please keep this instruction manual for future reference Instruction manual RBL4...
- If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting in order not to damage the compressor. - Larders (coolers) do not have a freezer compartment but can cool up to 4 - 6 °C. Please keep this instruction manual for future reference Instruction manual RBL4...
- You should clean the condenser with a broom at least once a year in order to save energy and increase the productivity. Please keep this instruction manual for future reference Instruction manual RBL4...
REPLACING THE LED LIGHT The LED light must be replaced by an authorised engineer or similar only. For more information please contact Caple service – 0117 938 7420 or service@caple.co.uk Please keep this instruction manual for future reference Instruction manual RBL4...
(bubbling sound) even when the compressor is not running. Do not worry, this is quite normal. If these sounds are different check if; - The appliance is installed firmly as described in the installation manual. - Objects in the appliance are vibrating. Please keep this instruction manual for future reference Instruction manual RBL4...
Page 14
Between 16 and 38 (°C) Between 16 and 32 (°C) Between 10 and 32 (°C) This appliance is designed for use at an ambient temperature within the 10°C - 32°C range. Please keep this instruction manual for future reference Instruction manual RBL4...
- If the problem persists after you have followed all the instructions above, please contact Caple service 0117 938 1900 option: 2. - The appliance you have purchased is designed for domestic use and can be used only at home for the stated purposes.
Door shelves Crisper Thermostat knob The purpose of this presentation is informing you about the parts of your appliance. The parts may vary depending on the model of the appliance. Please keep this instruction manual for future reference Instruction manual RBL4...
The blue wire must be connected to the terminal marked N. The brown wire must be connected to the terminal marked L. You must make sure the lead is firmly secured under the cord clamp. Please keep this instruction manual for future reference Instruction manual RBL4...
Real energy consumption depends on the conditions in which the equipment is used as well as where it is placed. **This equipment is designed for use at an ambient temperature within the 10°C - 32°C range. Please keep this instruction manual for future reference Instruction manual RBL4...
Page 27
Please keep this instruction manual for future reference Instruction manual RBL4...