Page 1
WPP-531-D-ADA-STEADY-SPK1.07UNVLr1-ISSUE4.0 SERVICE MANUAL MODEL WPP-531-D-ADA-SB WEATHERPROOF TELEPHONE WITH OPTIONAL STEADY BURNING BLUE LIGHT FEATURE EQUIPPED WITH SPK1.07UNVLr3 FIRMWARE Serving the Telephone Industry Since 1930 Communication Equipment 519 West South Park Street & Engineering Company Okeechobee, FL 34972 Voice: 863-357-0798 Fax: 863-357-0006...
Page 2
Issue 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL WPP-531-D-ADA-SB, EQUIPPED WITH SPK1.07UNVLr3 FIRMWARE. SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
(863) 357-0006 Fax GENERAL DESCRIPTION 2.01 The CEECO Model WPP-531-D-ADA-SB Telephone is a sturdy, hands free, vandal resistant, speakerphone. The telephone is constructed with a stainless steel panel and an aluminum weatherproof housing. This telephone comes with an optional ADA feature (red/green LED) giving visual feedback during periods of operation.
NOTE: Once the # key has been entered, an operator reorder signal, fast busy tone or other central office signals may be heard. Please disregard these sounds and continue programming, as they will have no affect on the programming. CEECO Communication Equipment & Engineering Company PROPRIETARY...
Example: Enter # 1 9 5 5 5 1 2 1 2. This will program the telephone to automatically dial the number 555-1212, when the CALL button button is pressed. #19 __ __ __ __ __ __ __ __ __ __ __ CEECO Communication Equipment & Engineering Company PROPRIETARY...
Do not dial PBX access number stored in location #18. Dial PBX number stored in location #18. Digit 9 Always 0 for this model Digit 10 No wink detect. Length of the wink detect. (1=50ms incremental to 450 ms. 5 is recommended). CEECO Communication Equipment & Engineering Company PROPRIETARY...
There will be an approximate one (1) second pause between the two numbers. If this does not work, please repeat sections 3.02, 3.03, 3.04, 3.06, 3.08, and 3.10 only. If trouble is still experienced, please refer to section 11.02. CEECO Communication Equipment & Engineering Company PROPRIETARY...
Testing is now complete. If any trouble was encountered that has not been remedied, please refer to section 11.02 of this manual, otherwise the phone is ready for operation. NOTE: CEECO can not be responsible for the called party's response regarding ADA features and compliance, and emergency response. 4.07 Please follow the installation notes on the next page before carefully return the telephone assembly to the weatherproof housing.
5.03 Run the inside station wire into the enclosure and terminate on the RJ11C modular jack inside, as depicted on the following page. The CEECO-provided jack must be used as it contains required over-voltage protection. Mount the housing in the intended location using the four mounting holes provided. There is a pole-mounting bracket available, which is sold separately.
5.07 Carefully return the telephone assembly to the housing, securing it in place with the four (4) security screws and security tool. 5.08 Telephone line wiring for modular jack: CEECO Communication Equipment & Engineering Company PROPRIETARY...
20% - 90% non condensating PROGRAMMING: Via DTMF keypad or remotely thru phone line. WEIGHT: Approximately 16 Pounds DIMENSIONS: 9" Wide x 13" High x 8.5" Deep TYPE JACK: RJ11C FCC REGISTRATION BW8USA-73021-MT-E CEECO Communication Equipment & Engineering Company PROPRIETARY...
FCC registration number and ringer equivalence number. These numbers are listed in Section 8.0. The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY...
(863) 357-0798 (863) 357-0006 9.03 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge, plus parts. The customer must pay the shipping costs in both directions. 9.04 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer’s list price.
Printed circuit boards should not be repaired in the field. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty.
ON position BEFORE going off-hook. When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position; this will decrease battery life. CEECO Communication Equipment & Engineering Company PROPRIETARY...