Output Specifications; Dimensions - Yamaha MX400 User Manual

16
Appendix
Output Specifications
Output Connection
ST1 OUT L/R
STEREO INSERT OUT L/R
ST2/MONI OUT L/R
REC OUT L/R
GROUP 1~4
AUX SEND 1~5
INPUT INSERT OUT
GROUP INSERT OUT
DIRECT OUT
PHONES OUT
*1. XLR-type connectors and Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
*2. Insert phone jacks (TRS) are unbalanced (Tip=out, Ring=in, Sleeve=GND).
*3. Phone jacks are unbalanced.
*4. In these specifications, when dB represents a specific voltage, 0dB is referenced to 775mV RMS, for TAPE SEND dBV represents a specific
voltage, 0dBV is referenced to 1V RMS.
• All specifications subject to change without notice.

Dimensions

MX400 User's Guide
Actual Source For Use with
Impedance Nominal
150 600
600 10k
75 600
600 10k
75 600
75 600
600 10k
600 10k
600 10k
100 40 phones
Wl
Wi
W
Output Level
Nominal
lines +4dB (1.23V)
lines 0dB (775mV)
lines +4dB (1.23V)
lines –10dBV (316mV)
lines +4dB (1.23V)
lines +4dB (1.23V)
lines 0dB (775mV)
lines 0dB (775mV)
lines 0dB (775mV)
3mW (346mV)
Mixer Connector
Max. Before Clip
+24dB (12.3V) XLR-3-32 type *1
+20dB (7.75V) Phone jack (TRS)*2
+20dB (7.75V) Phone jack *3
+16dBV (6.31V) RCA
+20dB (7.75V) Phone jack *3
+20dB (7.75V) Phone jack *3
+20dB (7.75V) Phone jack (TRS) *2
+20dBV (7.75V) Phone jack (TRS) *2
+20dB (7.75V) Phone jack *3
100mW (2.0V) Stereo phone jack
Model WI Wi W
MX400-8 465 527 562
MX400-12 585 647 682
MX400-16 705 767 802
MX400-24 945 1007 1042