Advertisement
IR Remote Control Function:
Bass Level
Control
Volume Level
Control
Using the supplied IR Remote Control will give access to further features and functions of the AVID3AC
and will allow adjustments to the sound levels and tone settings.
The LED display panel will show the settings as any adjustments are made as follows:
•
The overall volume level (0 lowest ~ 20 highest)
•
Bass (L.1 lowest ~ L.9 highest)
•
Treble (H.1 lowest ~ H.9 highest)
•
Balance (B.1 Fully Left ~ B.5 Centre ~ B.9 Fully Right)
After any changes have been made to the above, the LED display will revert to the set volume level.
Please ensure that the enclosed User Instructions are left with the AVID3AC unit, easily available to the
end user.
CIE-Group Ltd 3 Widdowson Close Blenheim Ind Est Bulwell Nottingham NG6 8WB UK
T: +44(0)115 9770075 F: +44(0)115 9770081 E: info@cie-group.com W: www.cie-group.com
Treble Level
Control
Power
ON/OFF
L/R Speaker
Balance
Function not enabled
on AVID3BT Model
Registered in England No. 2761780
Installation Guide
Before installation please take the time to read and understand the enclosed information.
What's included in the box?
1 x AVID3AC Amplifier
1x IR Remote Control Unit & Wall Bracket
1 x 2-Gang EO Recessed Backbox
Specifications:
Output Power
2 x 15W @ 4W
Line Inputs
Stereo 3.5mm Jack (Front panel)
2x Screw Terminal (Rear PCB)
Line Output
Fixed level (Unbalanced) 1v 47kW
Frequency Response
40Hz ~ 20KHz
Input Sensitivity
(Lo) 200mv / (Hi) 1v
Power Requirements
230v AC
Dimensions
165(W) x 100(H) x 35(D) mm
Weight
0.26kg
www.cie-group.com
01/18
Advertisement
Table of Contents
Related Manuals for CIE AVID3AC-WS4
Summary of Contents for CIE AVID3AC-WS4
- Page 1 230v AC Dimensions 165(W) x 100(H) x 35(D) mm Weight 0.26kg CIE-Group Ltd 3 Widdowson Close Blenheim Ind Est Bulwell Nottingham NG6 8WB UK T: +44(0)115 9770075 F: +44(0)115 9770081 E: info@cie-group.com W: www.cie-group.com www.cie-group.com Registered in England No. 2761780 01/18...
- Page 2 A Stereo 3.5mm jack input is provided on the front panel, two further hard wired AUX inputs are provided A jumper is provided to allow the AVID3AC to be used in either mono or stereo mode, the factory default is to the rear of the AVID3AC. stereo. If set to mono the amplifier will provide a mixed output to each loudspeaker terminal. The Hi/Lo switch adjusts the input sensitivity from 1v (Line Level) to 200mv (average Headphone output Loudspeakers should be wired to the L+ L- and R+ R- terminals, ensuring the phase of each loudspeaker level), allowing the interface of generic MP3, CD and media players without loss of system volume level. is the same. A clear LCD Display shows the desired volume level between 0 (no output) to 20 (maximum output) as well The line output is stereo and provides a fixed line output signal for feeding and external source such a s a as showing which input is in use (S1/S2). slave amplifier or induction loop system. If you are experiencing any problems please contact your reseller or the CIE-Group Technical Support Department on +44 (0)115 9770075.
Need help?
Do you have a question about the AVID3AC-WS4 and is the answer not in the manual?
Questions and answers