1.1. Retention of documents use. 1.2. Symbols used SEEBACHER cannot accept any liability for damage or malfunctions resulting from failure to observe these instructions. 2. Safety instructions 1.1. Retention of documents These instructions and all other applicable documents are part 2.1.
Switch off the power supply, check that there is no voltage, secure against being switched on again! The device may only be operated at voltages according to the tech- Seebacher GmbH nical data and loaded with the currents defined therein. Only use Marktstrasse 57 suitable equipment (system power supplies, etc.).
-25°C to +70°C Humidity 0-85% r. h. non condensing Protection class IP 30 CE mark Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2...
Page 6
Operating voltage COM for inputs (reference potential) Subnet (BUS A, RS-485) Subnet (BUS B, RS-485) View Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2...
Need help?
Do you have a question about the ISYGLT IN-04B REG and is the answer not in the manual?
Questions and answers