Samsung MagicLAN SWL-2200P User Manual page 54

5. MODULE PARAMETERS 5. MODULE PARAMETERS 5. MODULE PARAMETERS 5. MODULE PARAMETERS
networkmode networkmode networkmode networkmode
essid essid essid essid
wepreq wepreq wepreq wepreq
keyid keyid keyid keyid
key0 key0 key0 key0
key1 key1
key1 key1
key2 key2 key2 key2
key3 key3 key3 key3
channel channel The channel used in Ad-hoc mode.
channel channel
psmode psmode psmode psmode
pc_debug pc_debug
pc_debug pc_debug
6. WIRELESS EXTENSION 6. WIRELESS EXTENSION
6. WIRELESS EXTENSION 6. WIRELESS EXTENSION
The below things are the parameters used in "iwconfig" program.
essid essid essid essid
802.11 Network type
0 = 802.11 Ad_hoc Mode
1 = Infrastructure Mode(default)
3 = Ad-hoc Mode
Network name (SSID)
- Use the same name to connect AP with other clients.
Default value: ANY
Provide the high security with encryption of the date
through the wireless network.
0 = disabled(default)
3 = 40 bit WEP
7 = 128 bit WEP
The key used to encrypt the transmiting date.
0 .. 3(default=0)
(cf. 128bit WEP just support one key)
40 bit WEP needs 10 hexadecimal and 128bit WEP needs 26
hexadecimal.
(ie.key0=1234567890,or key0=12345abcde,
or key0=1234567890abcd12345678a4d3).
Same as key0.
Same as key0.
Same as key0.
4 = default
valid range: 1-14 (depends on local restrictions)
Power Saving Mode
- Make the Power Comsumption lower. But the efficiency
will be fallen off by the 802.11 specification.
0 = disabled(default)
1 = enabled
Select the debugging level(only when debugging)
0 .. 5
53