Page 1
Operation anual onitor Panel P -6228 * Rack mount products in the Western Hemisphere(North merica, South merica, and the Caribbean) do not have handles installed due to customer preference.
Page 2
Welcome personal welcome to you from the management and employees of Inter-M ll of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
MONITOR P NEL Contents Contents Unpacking ............................2 Installation Environment............................2 Important Safety Instructions......................2 Features ............................3 Operation ............................3 Front Panel ............................4 Rear Panel ............................5 pplications ............................6 Block Diagram ..........................7 Specifications ..........................8 Service Procedures............................9 Schematic ............................9 Parts List ............................9 Warranty ............................9 PM-6228...
MONITOR P NEL Unpacking Unpacking lthough your PM-6228 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation.
High sufficient speaker provides the clear and rich sound with users to check the status of output of each amplifier. The level of monitor speaker is adjustable by the designated switch. Operation Operation When using the channel selection switch, please select the channel needed to be checked and then start to monitor with appropriate level. PM-6228...
LEDS in selected switches light up to indicate status. 4. CH NNEL SELECTOR SWITCHES 1-8 Eight switches select any channel’s output to be monitored by the front panel speaker. 5. MONITOR SPE KER High-powered, full-fidelity speaker for convenient monitoring of selected amplifier channel. PM-6228...
2. UDIO INPUT TERMIN LS (HOT) Connect the positive (+) output terminals of power amplifiers to these inputs for monitoring. 3. UDIO INPUT TERMIN LS (COM) Connect the negative (-) output terminals of power amplifiers to these inputs for monitoring. PM-6228...
MONITOR P NEL Specifications Specifications PM-6228 Outside Inputs 8-100V or 70V inputs LED Monitor Outputs 8 simultaneous outputs Operation Temperature -10°C ~ +40°C/14°F~104°F Power Source 24V DC Weight (SET) 3.5kg/7.7lb Dimensions (SET) 482(W)x88(H)x280(D)mm/19(W)x3.5(H)x11(D)in * Specifications and design are subject to change without notice.
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
Page 12
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).