Related Manuals for CYP PUV-1540S-RX
Summary of Contents for CYP PUV-1540S-RX
- Page 1 PUV-1540S-TX 4K UHD HDBaseT™ Scaler/Receiver with PoH, IR, RS232, LAN and Audio De-Embedding OPERATION MANUAL...
- Page 3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
- Page 4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
-
Page 5: Table Of Contents
CONTENTS 1. Introduction ...........6 2. Applications ...........6 3. Package Contents ........6 4. System Requirements ......7 5. Features ..........7 6. Operation Controls and Functions ..8 6.1 Front Panel ........... 8 6.2 Rear Panel ............. 9 6.3 IR Cable Pinouts ........10 6.4 OSD Menu ..........10 7. -
Page 6: Introduction
1. INTRODUCTION This Receiver is designed to scale and convert HDBaseT video and audio for local HDMI output. The HDBaseT input supports resolutions up to 4K@60Hz (4:2:0, 8-bit). The scaled HDMI output supports resolutions from 640×480@60Hz up to 4K@60Hz and provides the ability to adjust the image with a number of fine tuning options including: contrast, brightness, hue, saturation, sharpness, noise reduction, and RGB levels. -
Page 7: System Requirements
4. SYSTEM REQUIREMENTS HDMI receiving equipment such as an HDTV, monitor or audio amplifier. Analogue audio receiving equipment such as an audio amplifier or powered speakers. A compatible HDBaseT Transmitter with 48V PoH support is strongly recommended. The use of “Premium High Speed HDMI”... -
Page 8: Operation Controls And Functions
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel POWER MENU ENTER PUV-1540S-RX SERVICE SERVICE: This is reserved for firmware update use only. POWER LED: This LED will illuminate to indicate the unit is on and receiving power. MENU: Press to enter the OSD menu, or to back out from menu items. -
Page 9: Rear Panel
6.2 Rear Panel DC 5V CAT5e/6/7 IN RS-232 HDMI OUT AUDIO OUT CAT5e/6/7 IN: Connect to a compatible HDBaseT Transmitter with a single Cat.5e/6/7 cable for transmission of all data signals. IR IN: Connect to the provided IR Extender to extend the IR control range of devices connected to the other end of the HDBaseT connection. -
Page 10: Ir Cable Pinouts
6.3 IR Cable Pinouts IR Extender Infrared Power Ground IR Blaster Power Infrared 6.4 OSD Menu All functions of this unit can be controlled by using the OSD (On Screen Display) which is activated by pressing the Menu button on the front of the unit. - Page 11 PICTURE LEVEL 2 LEVEL 3 LEVEL 4 0~100 (50) Brightness 0~100 (50) Contrast 0~100 (50) Finetune 0~100 (50) Saturation 0~100 (0) Sharpness Noise Reduction Middle High Auto 0~100 (50) Colour 0~100 (50) Green 0~100 (50) Blue 1) Brightness: Provides control over the overall brightness of the scaled output image.
- Page 12 OUTPUT LEVEL 2 LEVEL 3 Size Overscan Full BEST FIT Pan Scan Letterbox Underscan Follow In BYPASS 4K In -> 4K Out Scaler Resolution NATIVE 640×480 60 800×600 60 1024×768 60 1280×768 60 1360×768 60 1280×720 60 1280×800 60 1280×1024 60 1440×900 60 1400×1050 60 1680×1050 60...
- Page 13 OUTPUT LEVEL 2 LEVEL 3 1280×720p 50 1280×720p 60 1920×1080p 24 1920×1080p 25 1920×1080p 30 1920×1080p 50 1920×1080p 60 4K2K 24 4K2K 25 4K2K 30 4K2K 50 4K2K 60 4K2K (4:2:0) 50 4K2K (4:2:0) 60 1) Size: Selects the aspect ratio to use when outputting the source. “Full” stretches the source to fill the output resolution, regardless of the original aspect ratio, while “Best Fit”...
- Page 14 3) Resolution: Selects the output resolution to use. Selecting “Native” will make the unit automatically select an output resolution based on the detected EDID of the connected display. LEVEL 2 LEVEL 3 0~100 (50) H-Position V-Position 0~100 (50) Timer Transparent 0~100 (100) Display INFO...
- Page 15 MISCELLANY LEVEL 2 LEVEL 3 LEVEL 4 HDCP On Input FOLLOW OUTPUT HDCP On Output Follow Input DISABLE Auto Sync Off Fast Slow Auto Input EDID Manage HDBT EDID DEF. 1080P Def. 4K2K (3G) Def. 4K2K (4:2:0) Output 1) HDCP On Input: Enables or disables HDCP support on the HDMI input.
- Page 16 FACTORY LEVEL 2 LEVEL 3 Reset 1) Reset: Selecting YES will reset all of the unit’s settings back to their factory defaults. INFORMATION LEVEL 2 LEVEL 3 Input Output [Current Status Details] Valens Version Version 1) Information: This screen displays information about the unit’s current input and output status, as well as the current Valens and unit firmware versions.
-
Page 17: Connection Diagram
7. CONNECTION DIAGRAM Game Console HDMI Input IR In & Out 1.5m RS-232 Controlled 60° Device RS-232 60° RS-232 RS-232 Equipped PC/Laptop Power Supply Network Switch Cat.5e/6/7 Cable DC 5V CAT5e/6/7 IN RS-232 HDMI OUT AUDIO OUT IR In & Out HDMI Stereo 60°... -
Page 18: Specifications
8. SPECIFICATIONS 8.1 Technical Specifications HDMI Bandwidth 600MHz/18Gbps HDBaseT Bandwidth 340MHz/10.2Gbps Input Port 1×HDBaseT (RJ45) Output Ports 1×HDMI 1×Stereo (5-pin Terminal Block) Pass-through Ports 1×IR Extender (3.5mm) 1×IR Blaster (3.5mm) 1×RS-232 (3-pin Terminal Block) 1×LAN (RJ45) IR Frequency 30–50kHz (30–60kHz under ideal conditions) Baud Rate Up to 115200bps Power Supply... -
Page 19: Video Specifications
8.2 Video Specifications HDBaseT HDMI Supported PC Resolutions (Hz) Input Output 640×480 60, 72, 75, 85 800×600 56, 60, 72, 75, 85 1024×768 60, 70, 75, 85 1280×768 60, 75, 85 1360×768 1280×720 ... -
Page 20: Audio Specifications
HDBaseT HDMI Supported TV Resolutions (Hz) Input Output 720×480i 720×576i 720×480p 720×576p 1280×720p 50, 60 1920×1080i 24, 25, 30, 50, 60 1920×1080p 24, 25, 30, 50, 60 ... -
Page 21: Cable Specifications
8.4 Cable Specifications 1080p HDMI Cable Length 8-bit 12-bit 8-bit Output Cat. Cable Length 1080p Cat.5e 100m Cat.6 100m Cat.7 100m 100m Full HD Video (1080p) - Up to 1080p@60Hz, 12-bit colour - Data rates lower than 5.3Gbps or below 225MHz TMDS clock Ultra HD Video (4K) - 4K@24/25/30Hz &... -
Page 22: Acronyms
9. ACRONYMS ACRONYM COMPLETE TERM Cat.5e Category 5 (enhanced) cable Cat.6 Category 6 cable Cat.7 Category 7 cable Consumer Electronics Control Digital Visual Interface EDID Extended Display Identification Data High-Definition HDCP High-bandwidth Digital Content Protection HDMI High-Definition Multimedia Interface High Dynamic Range HDTV High-Definition Television Infrared...
Need help?
Do you have a question about the PUV-1540S-RX and is the answer not in the manual?
Questions and answers