Table of Contents
Advertisement
Assembly
6
Balancing the Arm
To properly balance the arm
with monitors mounted, adjust
the spring tension using the
supplied hex key as follows:
First, position and firmly hold the arm horizontally as shown.
Ask for assistance should you require it.
To avoid damage to monitors or mount,
always keep the arm in a horizontal
position while making adjustments.
Ask for assistance should you require it.
7
Securing the Cable
Management Covers
U
10
If the arm drops, turn the
adjustment screw counter-
clockwise until it stays in
a horizontal position.
If the arm rises, turn the
adjustment screw clockwise
until it stays in a horizontal
position.
Do not over-tighten screws.
Advertisement
Table of Contents
