Sanyo LC-XB42N Owner's Manual page 131

Output the converted file directly to the projector with the USB memory.
The file converted by Network Viewer 5 [File Converter 1] can be output directly to the projector
with the USB memory. Refer to the "Creating the available data" for details of Network Viewer 5 [File
Converter 1]. (p.114)
Specify "FTP server" as an output destination of the converted file in the "Option" dialog of Network
Viewer 5 [File Converter 1].
FTP server
Host name ................ Enter host name or IP address of the
FTP server
Root Folder .............. Specify the root directory of the FTP
server. Normally use "/".
User ID ....................... If the network PIN code is set for the
projector, enter "user".
Password................... If the network PIN code is set for the
projector, enter the network PIN code.
Output folder .......... Click Reference button and select
the destination directory on the USB
memory.
Output the program file directly to the projector with the USB memory.
The program file created by Network Viewer 5 (Program Editor) can be output directly to the projector
with the USB memory.
For details of Network Viewer 5 (Program Editor), refer to "Creating a program file" (p.119).
Host name ................ Enter host name or IP address of the
Projector
Root Folder .............. Specify the root directory of the FTP
server. Normally use "/".
User ID ....................... If the network PIN code is set for the
projector, enter "user".
Password................... If the network PIN code is set for
the projector, enter the network PIN
code.
Use of the projector as FTP server
11