Advertisement
7.
TROUBLESHOOTING
PROBLEM
Jack will not lift to full height
Jack will not hold the load
Lift arm will not lower
Jack feels spongy when lifting
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
CAUSE
Oil level low
Release valve not closing
Hydraulic jack oil is contaminated
Pump valves not sealing
Cylinder ram binding
Parts worn
Internal component damage
Broken or unhooked return spring
Lift arm linkage either bent or binding
System requires purging
Environmental Protection
fluids according to local regulation
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
REMEDY
Check / top up oil level
Contact authorised service agent
Contact authorised service agent
Refer to air purge procedure in Section 4.2
s.
01284 757500
01284 703534
RJA2500.V2
www.sealey.co.uk
sales@sealey.co.uk
Issue: 1 - 21/02/17
Advertisement
