Operating the air conditioner
without the remote control
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front grille.
- Lift up both sides of the front grille slightly.
* The feature can be changed according to
type of model.
2
* The feature can be changed according to
type of model.
- The temperature is set to
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings. This function is a factory de-
fault setting.
ON/OFF
button
22°C
(72 °F)
ADVANCED FUNCTIONS
Disabling auto restart
1
Open the front grille.
- Lift up both sides of the front grille slightly.
* The feature can be changed according to
type of model.
2
seconds.
- The unit will beep twice and the lamp will
blink twice 4 times.
* The feature can be changed according to
type of model.
- To re-enable the function, press the On/
unit will beep twice and the lamp will
blink 4 times.
!
NOTE
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
15
ON/OFF
button