LG 26LU3 Series Owner's Manual page 63

PICTURE CONTROL
Colour Gamut
(Advanced Control:
Wide/Standard)
Colour Gamut
(Expert Control: EBU/
SMPTE/BT709/Wide)
Edge Enhancer
(Off/Low/High)
xvYCC
(Auto/off/on)
Expert Pattern
(Off/Pattern1/Pattern2)
Colour Filter
(Off/Red/Green/Blue)
Colour Temperature
(Medium/Warm/Cool)
Colour Management
System
50
Standard : Mode to reproduce original colour according to the standard of
•
input signal independent of the display characteristics.
Wide: Mode to use and set the rich colour area of the display.
•
■ Maximize the utilization for colour area that can be expressed.
■ Displays color domain of signal in Expert Control.
■ Shows clearer and distinctive yet natural corners of the video.
■ This function is enabled in "Picture Mode- Expert."
*This feature is not available for all models.
■ This is the function to express richer colour.
■ This function is enabled in "Picture mode - Cinema, Expert" when xvYCC sig-
nal is inputted through HDMI
■ This is the pattern necessary for expert adjustment.
■ This function is enabled in "Picture Mode - Expert" when you watch DTV.
■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
This is the function to adjust the overall colour of the screen to the feeling you want.
Method : 2 Points
a. •
Pattern: Inner, Outer
•
Red/Green/Blue Contrast, Red/Green/Blue Brightness:
•
The adjustment range is -50 ~ +50.
b. Method : 10 point IRE
•
Pattern: Inner / Outer
•
IRE (Institute of Radio Engineers) is the unit to display the size of the video sig-
•
nal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue
according to each setting.
Luminance: This function displays calculated luminance value for 2.2 gamma.
•
You can input luminance value you want at 100 IRE, than the target luminance
value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 ~ +50.
•
■ As the tool used by the experts to make adjustments by using the test pat-
terns, this does not affect other colours but can be used to selectively
adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjust-
ments for the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment
•
range is -30 ~ +30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment
•
range is -30 ~ +30.
■ This feature is disable in RGB-PC and HDMI (PC) mode.