C&H Pulse Generator Module VX462B Specifications

Specifications:

Pulse Repetition Interval:
Range
Resolution 25ns min, 10bits
Accuracy

Pulse Width:

Range
Resolution 25ns min, 10bits
Accuracy
Output characheristics:
Amplitude
(low out impedance)
(50Ω out impedance)
Accuracy + 1%Pgm value,
+ 3% of amplitude,
Transition Time
(@ 5V)
Impedance
50Ω (selectable)
C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
Delay Timing (from Trig
Out):
50ns to 1 sec
Range
+ 15ns
Resolution
Accuracy
Trigger Out:
25ns to 1 sec
+ 15ns
Trigger/Gate In:
Temperature:
Operating
+ 10V into 50Ω
Storeage
+ 5V into 50Ω
Power:
+ 100mv

Ordering Information:

5ns typical
(fixed)
Description
2-5Ω or
VX462B
VX462B
Pulse Generator
Module
The VX462B is a 20Mhz pulse
generator with additional 40Mhz
square
operating modes are Normal,
Triggered, Gated, Delayed pulse
and Double Pulse (second pulse
occurs "delay" time after Trigger
Out). Front panel BNC connectors
are provided for Pulse Out, Trigger
Out and Trigger (& Gate) In. LED
indicators are provided for MODID
and RUN.
selectable for low output impedance
capable + 10V into a 50Ω load or
50Ω output impedance that provides
better matching for 50Ω loads at
drive levels up to + 5V.
VXIbus Compliance
Complies with ANSI/IEEE Std. 1014-
1987 IEC 821, IEC 822 and VXIbus
Rev 1.4.
25ns to 1 sec
A16:D16 DTB Slave
25ns min, 10bits
+ 15ns
Register Based
No SYSFAIL
TTL, 10 gate drive
Capability
No Interrupts
TTL IACKIN tied to IACKOUT
BRX tied to BGX
Form Factor: Size B
0˚C to +50˚C
Built in test via feedback registers
-40˚C to 65˚C
+5V @3A
Applications
+12V @ 0.4A
• Pulse Generator
• Square Wave Generator
• Clock Source
Part Number
• Delayed Trigger
11026335-0001
wave capability.
The unit is jumpter
Its