Electra C4510IE User Manual
  1. Manuals
  2. Brands
  3. Electra Manuals
  4. Dishwasher
  5. C4510IE
  6. User manual

Electra C4510IE User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

EN
Dishwasher / User Manual
C4510IE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C4510IE and is the answer not in the manual?

Questions and answers

Yusuf Pandor
May 27, 2025

where is the serial number

0

Related Manuals for Electra C4510IE

Summary of Contents for Electra C4510IE

  • Page 1 Dishwasher / User Manual C4510IE...
  • Page 2 Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.

  • Page 3: Table Of Contents

    CONTENTS 1.SAFETY INSTRUCTIONS ....................1 1.1. General Safety Warnings ....................1 1.2. Installation Warnings .....................1 1.3. During Use........................2 2.INSTALLATION ......................... 6 2.1. Machine Positioning .....................6 2.2. Water Connection ......................6 2.3. Water Inlet Hose ......................6 2.4. Drain Hose........................6 2.5. Electrical Connection ....................7 2.6.
  • Page 4 8.CLEANING AND MAINTENANCE ................. 18 8.1. Cleaning the Machine and Filters ................18 8.2. Spray Arms ........................18 8.3. Drain Pump ........................19 9.TROUBLESHOOTING ....................20...

  • Page 5: Safety Instructions

    1.1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.

  • Page 6: Installation Warnings

    1.2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.
  • Page 7 • it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher. Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse.
  • Page 8 be performed by an authorised service company, otherwise the warranty will be void. Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap. Operation at a low voltage will cause a decline in performance levels.
  • Page 9 CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

  • Page 10: Installation

    2. INSTALLATION WARNING: Use the new water inlet 2.1. Machine positioning hose supplied with your machine, do not use an old machine’s hose. When positioning the machine, place it in an area where dishes can be easily loaded WARNING: Run water through the and unloaded.

  • Page 11: Electrical Connection

    2.5 Electrical connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical Specifications"...

  • Page 12: Technical Specifications

    3. TECHNICAL SPECIFICATIONS 3.2. Technical specifications 10 place Capacity settings Dimensions Height 820-870(mm) Width 450(mm) Depth 570(mm) Net weight 32 kg Operating 220-240V 50 voltage / (Hz) frequency Total 10(A) current Total power 1900(W) 3.1. General appearance Maximum: 1. Upper basket with racks Water 1 (Mpa) 2.

  • Page 13: Before Using The Appliance

    4. BEFORE USING THE APPLIANCE 4.1. Preparing your dishwasher for first use • Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine. • Remove all packaging material inside the machine. •...

  • Page 14: Test Strip

    4.4. Test Strip Run water through Keep the strip in Set the hardness level of Shake the strip. Wait (1min.) the tap (1min.) the water (1sec) your machine. second munite munite NOTE: The factory hardness level setting is “3”. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

  • Page 15: Filling The Detergent

    Do not fill detergent into the detergent setting set too low, whitish stains remains compartment more than required; otherwise on dishes and dishes do not dry and you can see whitish streaks or bluish layers washed clean. If rinse aid dosage setting on glass and dishes and may cause glass set too height, you can see bluish layers on corrosion.

  • Page 16: Loading Your Dishwasher

    5. LOADING YOUR DISHWASHER For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings. Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended You can place cups, glasses, stemware, small plates, bowls, etc.

  • Page 17: Alternative Basket Loads

    5.2. Alternative Basket Loads Important Note for Test Laboratories Lower Basket For detailed information required for tests according to EN normatives and a softcopy of the manual, please send the model name and serial number to the following address: dishwasher@standardtest.info Top Basket Incorrect Loads Incorrect loading can cause poor washing...

  • Page 18: Programme Table

    6. PROGRAMME TABLE Program Name: Intensive 65°C Super 50’ Icon Standard program for normally soiled daily Suitable for normally Suitable for heavily soiled Type of Soil: using dishes with reduced soiled daily dishes with dishes energy and water faster program. consumptions..

  • Page 19: The Control Panel

    7. THE CONTROL PANEL time is cancelled. NOTE: If you decide not to start the selected programme, please see the "Changing a Programme" and "Cancelling a Programme" sections. NOTE: When there is insufficient 1. On/Off button softening salt, the Salt Lack Warning 2.

  • Page 20: Cancelling A Programme

    7.2. Cancelling a Programme Buzzer Sound Control Follow the steps below to cancel a To change the buzzer sound level, follow programme while in operation. the below steps: 1. Open the door and press Programme (2) and Half Load (3) buttons simultaneously When the door of your machine is for 3 seconds.
  • Page 21 5. To save the selected setting, turn off the machine. In factory setting, Save Power Mode is active. Infoled 2.1 (Model Dependent) LED Indicator State of the Machine The machine is running a Red, continuous program. Red, flashing A program is cancelled. The machine has a fault.

  • Page 22: Cleaning And Maintenance

    8. CLEANING AND To remove and clean the filter combination, turn it counter clockwise and remove it by MAINTENANCE lifting it upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove Cleaning your dishwasher is important to the metal filter (3).Rinse the filter with lots of maintain the machine’s service life water until it is free of residue.

  • Page 23: Drain Pump

    8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.

  • Page 24: Troubleshooting

    9. TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.
  • Page 25 FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
  • Page 26 AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Make sure the water inlet tap is open and water is flowing. Water inlet system Separate the inlet hose from the tap and failure clean the filter of the hose. Contact for service if the error continues.
  • Page 27 The installation and repairing procedures should always carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons. Repairs may be carried out by technicians only.
  • Page 28 03335 777 238 Registering your product helps us provide you with a speedy service should you need assistance under warranty, and it enables you to receive news about essential updates to get the most out of your electra product. Activate online: electra.warrantyonline.co.uk...
  • Page 29 http://vestel.co.uk/en/...

Table of Contents